DK Digital CDB-700 Uživatelský manuál stáhnout pdf (Strana 90)

Page 90 of 108

Is mounted

with 4 screws

Mounting:

Massage motor on a plate

Mounting of the screw with max. torque 2 Nm

Mounting of massage motor by using brackets:

Screw

Slat

Bracket

Massage

motor

Nut

The massage unit is mounted with 4 x M6 roundheaded machine screws with ﬂat underside. 15 to 20 mm long + the thickness of the bracket.

Torque max. 2-3 Nm.

2 brackets must be used - one on each side of the slat.

6. MJB (MEDLINE

CARELINE

)

The MJB (Modular Junction Box) is designed for use together with the CB20 and other OpenBus

control boxes.

The MJB makes it possible to connect handsets, attendant controls and accessories with the CB20/CB6S/CB16. The

CB20 has 2 modular jack interfaces, but by using the MJB the connection possiblities are greatly increased. One

“modular jack” channel is used for connecting to the control box.

7. SLS (MEDLINE

CARELINE

TECHLINE

)

LINAK has designed a switch that can be mounted in connection with the 24V DC actuators: LA12, LA22, LA28,

LA28S, LA31, LA32, or LA34 and a control box on e.g. a bed frame.

The Safety Limit Switch (SLS). The SLS Switch is primarily used as a Limit Switch in systems consisting of a control

box, LA28/28S and/or LA32.

As an example the SLS can be installed on the actuator cable where it disconnects the actuator in either inward or

outward direction when activated. The SLS can also be used as a signal control directly connected to a control box.

8. SMPS30 (MEDLINE

CARELINE

)

The SMPS30 is a very powerful Switch Mode Power Supply typically used

for Treatment or Examination Couches. The SMPS30 is an eco-friendly

solution due to a low standby power consumption compared to tradi-

tional transformer solutions. The universal input voltage makes the SMPS

adaptable to the worldwide market irrespective of the input voltage.

Usage:

• Compatibility: LA43 IC, LA44 IC

• Duty Cycle*: 10%, 2 minutes continuous use followed by 18 minutes not in use.

• Operating temperature: 5°C to 40°C

• Storage temperature: -10°C to 50°C

• Relative humidity: 20% to 90% @ 30°C – not condensing

• Atmospheric pressure: 700 to 1060 hPa

• Altitude: max. 2000 metres above sea level

• Approvals: IEC60601-1:2005 3

ed., ANSI / AAMI ES60601-1:2005, 3

edition, CAN / CSA-22.2 No 60601-1:2008

* AT 10% DUTY CYCLE, MAX. OUTPUT POWER IS POSSIBLE AT AN AMBIENT TEMPERATURE OF 25°C

...to be continued

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 107 108

Komentáře k této Příručce

Žádné komentáře

DK Digital CDB-700 Uživatelský manuál Strana 90

Komentáře k této Příručce

Související produkty a manuály pro ne DK Digital CDB-700