DK Digital CDB-700 Uživatelský manuál stáhnout pdf (Strana 87)

Page 87 of 108

MBJ1

For use together with CBJ1 or CBJ2 or CBJC, CHJ2 and BAJ1 or BAJ2. I. e.

when combining control box, charger and battery pack MBJ1 has to be used.

MBJ2

For use together with CBJ1 or CBJ2 or CBJC, and BAJ1 or BAJ2. I. e. when

combining control box and battery pack MBJ2 has to be used.

MBJ3

For use together with CHJ2 and BAJ1 or BAJ2. I. e. when combining charger

and battery pack MBJ3 has to be used.

Depending on of what your JUMBO system consists you need to use one of the following three mounting brackets. IP protection is only valid when

the JUMBO system is mounted vertically.

8. MBJ1/2/3 (MEDLINE

CARELINE

)

All three brackets include matching screws (IPX1, IPXX and IPX5 are delivered with stainless screws). The mounting screws for the control box,

charger must be tightened with a maximum torque of 1 Nm.

7. CHJ2 (MEDLINE

CARELINE

)

The charger CHJ2 has been specially designed for use as a wall-charger for

the JUMBO system.

The CHJ2 charger is a Switch Mode Power Supply (SMPS) version which

makes charging of the batteries more efﬁcient.

The charging time for a BAJ1 or a BAJ2 battery pack is approx. 4 hours.

Mains voltage from 100 V AC – 240 V AC (50/60 Hz) is possible on same

charger.

The charger indicates whether the charger is connected to the mains

(green LED) or whether the battery is being charged (yellow LED). Medically

approved.

Usage:

• Approvals: IEC60601-1:2005 3

edition, ANSI/AAMI ES60601:1 2005 3

edition and CAN / CSA-22.2 No 60601-1:2008

• Ambient temperatures: + 5 to + 40 °C

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 107 108

Žádné komentáře

DK Digital CDB-700 Uživatelský manuál Strana 87