DK Digital CDB-700 Uživatelský manuál stáhnout pdf (Strana 76)

Page 76 of 108

The HB50 is primarily designed for the LINAK JUMBO system and most of

LINAK control boxes with memory functions.

The HB50 gives the user access to a range of memory functions, allowing

present positions to be stored. For use in a wide variety of hospital,

patient care and industrial applications.

15. HB50 (MEDLINE

CARELINE

TECHLINE

)

The HB60 series is exclusively designed to be used together with the LINAK

HOMELINE

system: LA31/LA29/LA28C/CB7 or CB9 with or without

memory.

16. HB60 (HOMELINE

)

LINAK offers the HB70 with protection class IPX6 as standard and a

range of options such as control of up to 5 actuators, memory, and

simultaneous drive. The HB70 is designed to operate with most LINAK

control boxes.

17. HB70 (MEDLINE

CARELINE

)

Usage:

• Compatible with most LINAK control boxes.

• Approved according to: EN 60601-1, EN 60335-1 and UL 60601-1 as part of a LINAK actuator system

...to be continued

Recommendation:

• It is not possible to combine HB7x with the binary based CB9..PM/PN.

• The IPX6 Washable version has a special adhesive for the front covers.

• The HB75xE0 used together with CB140 will give trend and anti-trend on channel 1and 2 of the control box when using the last button row.

• All front covers use the codes W0 (not Washable) and WW (Washable) Memory:

Memory:

• The memory and parallel functions require the control box to have a microprocessor.

• When storing the memory position on the CB20, CB14, CB18MKII and newer versions the actuators must be run to the desired position and the

“store” button (S) must be pushed. Then the desired memory position button (1, 2 or 3) must be activated within 2 seconds.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 107 108

Žádné komentáře

DK Digital CDB-700 Uživatelský manuál Strana 76