DK Digital CDB-600 Specifikace stáhnout pdf (Strana 19)

MSD Software Manual PRELIMINARY Release Chapter 6 The Extended Audio Matrix.

6.3.2.3 Scope Colour. 

The colour of the 'Audio Vector Oscilloscope' and the Jelly-Fish can be

changed by entering the colour menu with the [SCOPCOL] key.

The colour selection menu.

6.4 Audio groups and Gain.

The physical outputs from the MSD can be assigned to groups. These groups

can have different output gains. I.e. the digital group/outputs can be 6 dB

higher then the analogue group/outputs. There are three different groups for

the physical outputs: None, Master, Analogue OR Digital (depending on the

type of physical output in the MSD).

Note: The analogue outputs can not be assigned to the digital group and vice versa.

6.4.1 Assign Audio Group.

To assign a physical output to a new Audio Group, move the cursor to the

desired destination using the [] / [] keys. Now move the cursor to the

group-column and the press the [Option] key. This will open the ‘Group

Selection’ window. Use the [] / [] keys to select the group and then press

[Select] to assign the new group or press [Exit] to cancel.

6.4.2.1 Adjust the Output Gain for a single output.

The output gain menu.

To adjust the output gain of a single output, use the [] / [] keys to move

the cursor to the column ‘GAIN’ and then use the use the [] / [] keys to

move the cursor to the desired output where the gain is to be adjusted. Press

the [Option] key to enter the ‘Output Gain’ menu. In the ‘Output Gain’ menu

use the [] / [] key to adjust the output gain and then press [Exit] when

done.

The output gain can be adjusted in steps of 0,5dB between –12dB and

+12,0dB.

PRELIMINARY Release Page 15 of 64.

The upper part of the selection

window for the audio groups.

(Analogue outputs.)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Žádné komentáře

DK Digital CDB-600 Specifikace Strana 19